MOERSE LEKKER SALES, LLC

 

BERETTA CX-4 STORM

BARREL SHROUD

for the 9mm, .40 and .45

 

You already love your Beretta CX-4 Storm, and accessorizing it is just too much fun.  I own a 9mm Storm and even before I received the carbine, I had many accessories waiting for it's arrival.

I was frustrated that after months of searching I could not locate a dealer who had stock of the highly requested barrel shroud.  Beretta USA does not even carry stock most of the time.  I was finally able to get hold of a Beretta shroud, but it was very heavy and did not seem to "flow" with the rest of the Storm.  The factory shroud was just big and ugly.  Additionally, it uses 9 set-screws, with nylon/teflon tips, which I did not want on my gun's hot barrel.  Look at the bottom of the page to compare the shrouds.

So, now, I am offering these aftermarket barrel shrouds for sale. 

 

Not only does it look really good, the shroud will also protect your hand(s) from the hot barrel when handling the carbine after shooting.

Weighing in at a mere 3.5ounces, you will barely notice the difference in weight on your Storm. (unlike the thick steel factory shroud)

It literally installs in seconds with an Allen wrench which is supplied.  The shroud uses one or two brass set screws to push against the bottom of your rifle's barrel to securely hold the shroud to the barrel.  I have found that brass set-screws are better than a nylon, teflon or steel ones and more secure than a holding ring around the beveled area.  The shroud has no external hooking points, thus it will not hinder your tactical movements.  Obviously, the rifle in the pictures is not included.  Please e-mail me if you have any specific questions about this shroud.  YES, the installed shroud fits perfectly into the factory hard case - see pictured below.

 

It comes with everything you need to install it.  Just add a rifle.

 

HOW TO INSTALL

 

 

NOW ALSO AVAILABLE IN

NON-VENTILATED STYLE

 

 

 

Our Shroud in Factory Hard Case:

 

 

Factory Shroud in CX-4 Hard Case:

 

 

CLICK HERE FOR ADDITIONAL CUSTOMER SUBMITTED PICTURES

 

 

Feel free to compare the looks of our shroud to the Beretta factory shroud...

Beretta Factory Shroud:

Beretta Factory Shroud Installed on CX-4:

 

Please e-mail me with any questions
Copyright 2007 Moerse Lekker Sales, LLC. All rights reserved.
Revised: 01/04/14